Stored Settings
Your Construction Master™ has a number of Preference Settings, some of which are Stored Setting values for various functions.

The examples below will demonstrate short-cut keystrokes for changing the default Stored Setting values.

You may always access the Preferences Screen by pressing [Conv] followed by [Store].

To reset all Stored Setting values to factory defaults, use [Conv] [×].

Related functions:

Preferences

Example:

1. Short-cut keystrokes to entering/changing Stored Setting values.

Stored Value	Keystroke
Headroom Height	Can only be changed from Preferences. Default: 6 FEET 8 INCH
Riser Height	7 [.] 5 [Store] [7] Default: 7 1/2 INCH
Floor Height	10 [Store] [8] Default: 10 INCH
Tread Width	10 [Store] [9] Default: 10 INCH
Block Area	128 [Inch] [Inch] [Store] [4] Default: 128. SQUARE INCH
Block Length	16 [Inch] [Store] [4] Default: 16 INCH
On-Center Spacing	16 [Store] [5] Default: 16 INCH
Footing Area	264 [Inch] [Inch] [Store] [6] Default: 264. SQUARE INCH
Spring Angle	45 [Store] [Comp Miter] Default: 45.00°
Weight Per Volume	1 [.] 5 [Store] [0]* Default: 1.5 TON Per CUBIC YARD

* Note: repeated presses of [0] will toggle through available weight/volume options.

Looking for more help?
Visit Product Support
or email techsup@calculated.com